Sesebelisoa sa ho Fumana Phoso ea Arc (AFDD) CJAF1

Tlhaloso e Khutšoanyane:

CJAF1 Single module AFDD/RCBO e nang le switched N pole e fana ka maemo a phahameng ka ho fetisisa a ts'ireletso bakeng sa ts'ebetso le basebelisi ba eona.E kopanya ts'ebetso ea sesebelisoa se sebelisoang hona joale bakeng sa ho lemoha ho lutla ha lefats'e, ts'ireletso ea nako e telele bakeng sa ho lemoha phoso ea potoloho le ea Arc bakeng sa li-arcs tse tšoanang le tsa lihlopha.Sesebelisoa se reretsoe ho fokotsa kotsi ea mollo ka ho khantša mehloli ea motlakase.Ka lebaka la bophara ba mojule o le mong, ha e hloke lisebelisoa tse kholoanyane tsa bareki mme AFDD e ka kenngoa habonolo lits'ebetsong tse seng li ntse li le teng.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso

Standard			IEC/BS/EN62606,IEC/AS/NZS 61009.1 (RCBO)
E lekantsoe hajoale			6,10,13,16,20,25,32,40A
Matla a lekantsoeng			230/240V AC
E lekantsoe khafetsa			50/60Hz
Boholo ba matla a ho sebetsa			1.1Un
Bonyane ba motlakase o sebetsang			180V
Tekanyo ea ts'ireletso			IP20 / IP40 (Litheminale/Ntlo)
Mofuta le tlhophiso ea ho kenya			Din-Rail
Kopo			Yuniti ea bareki
Mothinya oa ho khoehla			B,C
E lekantsoe matla a ho etsa le ho robeha (I△m)			2000A
Ts'ebetso ea mochini			>10000
Ts'ebetso ea motlakase			≥1200
E lekantsoe residual operation current (I△n)			10,30,100,300mA
E lekantsoe matla a nako e khuts'oane (Icn)			6kA
Tlhahlobo ea AFDD e bolela			Ts'ebetso ea tlhahlobo ea othomathike ho latela 8.17 IEC 62606
Sehlopha ho latela IEC 62606			4.1.2 - Sehlopha sa AFDD se kopantsoe ka sesebelisoa se sireletsang
Mocheso o sebetsang oa tikoloho			-25°C ho isa ho 40°C
AFDD sesupo se loketseng			Letšoao la LED le le leng
Mosebetsi oa overvoltage			Overvoltage condition of 270Vrms to 300Vrms for 10 seconds will make device to trip. Letšoao la LED la leeto la over-voltage le tla fanoa mabapi le sehlahisoa sa latch hape.
Nako ea ho itlhahloba			1 Hora
Boemo ba lefats'e			Tekanyetso ea nako ea leeto (boleng bo lekantsoeng bo tloaelehileng)
0.5 x Idn			Ha ho leeto
1 x Idn			<300 ms (ka lebitso <40 ms)
5 x Idn			<40ms (ka lebitso <40 ms)Sebaka sa Maeto sa Maeto

Ts'ebetso le Pontšo

■ Letšoao la LED:
□ Ka mor'a ho khoptjoa tlas'a boemo ba phoso, letšoao la boemo ba phoso le tla bontša boemo ba phoso ho latela tafole e fapaneng.
□ Tatelano e benyang ea LED e pheta-pheta 1.5sec e 'ngoe le e 'ngoe bakeng sa metsotsoana e 10 e latelang ka mor'a ho matlafatsa

■Series Arc Fault:
□1 Khanya – Emisa – 1 Khanya – Emisa – 1 Flash

■Parallel Arc Fault:
□1 2 Hoa Khanya – Ho Emisa – Ho Khanya ha 2 – Khutsa – Ho Khanya ha 2

■ Ho Feta ha Voltage Fault:
□3 Hoa Khanya – Emisa – Ho Khanya ha 3 – Khutsa – Lianyese tse 3

■ Phoso ea Boitlhahlobo:
□1 Flash – Emisa -1 Khanya – Emisa -1 Khanya (Ka Rateha Habeli)

tlhaloso ea sehlahisoa1

E fetileng: Sekhahla se Senyenyane sa Potoloho (MCB) CJM2-63-1 1P

E 'ngoe: CJX2-95 AC Motlakase oa Motlakase 4pole Magnetic Contactor

Ngola molaetsa wa hao mona mme o re romele wona